150
Maintenance
Battery Charging (Sealed Battery)
NOTE: Always verify battery condition before and 1-2 hours after the end of charging.
State of
Charge
Voltage Action
Charge Time
(Using constant current
charger @ standard amps
specified on top of battery)
100% 12.8-13.0 volts None, check at 3 months from
date of manufacture
None required
75%-100% 12.5-12.8 volts May need slight charge, if no
charge given, check in 3
months
3-6 hours
50%-75% 12.0-12.5 volts Needs charge 5-11 hours
25%-50% 11.5-12.0 volts Needs charge At least 13 hours, verify
state of charge
0%-25% 11.5 volts or less Needs charge with desulfating
charger
At least 20 hours
To Next Page
Loading...
Need help?
General
