53
FEATURES AND CONTROLS
Lights
WARNING
Operating the ATV on streets or roads, especially in
darkness, could result in an accident and serious
injury or death.
Your ATV is not equipped with highway-approved
lights. It’s designed for and must be used for
off-road use only. Use caution and drive at
reduced speeds in conditions of reduced visibility
such as fog, rain and darkness.
The light switch is located on the left handlebar. It’s used
to turn the lights on and off and to switch the lights from
HI to LO.
NOTE: The lights won’t work unless the key is in the ON position and the engine stop
switch is in the RUN position.
To Next Page
Loading...
Need help?
General
