EasyManua.ls Logo

Polaris Outlaw - Starting a Warm Engine

Polaris Outlaw
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
OPERATION
Starting a Warm Engine
Follow the procedure for starting a cold engine, but do not use the choke.
If the engine has cooled to a point where it does not readily start, intermittent use of t he
choke (pulled half way out) may be necessary.
If you believe the engine is over-choked when warm, push the choke lever completely in
and depress the throttle lever fully while cranking to ai d in starting. Release t he throttle
lever immediately after the engine starts.
If the engine does not start, review the engine troubleshooting information beginning on
page 174. If all conditions are favorable and the engine still does not start, see your Polaris
dealer for service.

Table of Contents

Related product manuals