76
OPERATION
Starting a Cold Engine
NOTE: If starting the engine while in neutral, the neutral indicator light should be on. If it
isn’t, disengage the clutch and shift the foot pedal to find neutral. See page 65.
If starting the engine while in gear, apply the hand brake and squeeze the clutch
lever fully to disengage the clutch.
6. Press the start button to start the engine. Activat e the starter for a maximum of five
seconds. R elease the start button immediately when t he engine starts.
NOTE: Do not press the throttle lever while starting the engine.
NOTE: Excessive engagement may result in starter damage.
7. If the engine does not start, wait five seconds after rel easing the start button, then
activate the starter for another five seconds. Repeat until the engine starts.
8. If the engine slows or s tops, position the choke knob half way in to allow proper engine
warm-up.
9. Vary the engine RPM slightly with the throttle to aid in warm-up. When the engine
idles smoothly, push the choke completely in.
To Next Page
Loading...
Need help?
General
