73
OPERATION
Pre-Ride Insp ectio n
Pre-Ride Checklist See Page
Frame nuts, bolts, fasteners Inspect, ensure tightness --
Fuel and oil Ensure proper levels 105
Coolant level (if applicable) Ensure proper level 114
Coolant hoses (if applicable) Inspect for leaks --
Throttle Ensure proper operation 54, 164
Indicator lights / switches Ensure operation 51
Engine stop switch Ensure proper operation 51
Air filter, pre-filter Inspect, clean 116
Headlamp Check operation, apply Polaris dielectric grease to
the socket when the lamp is replaced
118
Brake light / tail lamp Check operation --
Riding gear Wear helmet, goggles, protective clothing 12
A-arm ball joints Check freeplay. If the tire moves excessively, do
not operate. See your Polaris dealer.
98
Rear shaft assembly Check boots for tears, punctures and grease leaks. 144
To Next Page
Loading...
