85
OPERATION
Driving Safely
Turning Around on a Hill
5. Staying uphill of the ATV, turn the handlebars full
left. Reach across the handlebar and apply the
front brakes to unlock the park brake.
6. With the front brakes applied, pull in the clutch
lever. Use the brakes to slowly allow the vehicle
to roll around to your right until it’s pointing
across the hill or slightly downward.
7. With the front brakes still applied, release the
clutch lever and lock the park brake. R emount
from the uphill side, keeping body weight uphill.
8. Pull in the clutch lever, shift into neutral and
restart the engine.
9. Release the park brake and slowly release the clutch lever, allowing the ATV to proceed
slowly. Stay in first gear, using the brakes for additional speed control if necessary, until
more level ground is reached. Do not apply the brakes abruptly when driving downhill.
8’ (2.4m)
To Next Page
Loading...
Need help?
General
