EasyManua.ls Logo

Polaris Power P1000i - Pre-Operation Inspection; Pre-Operation Inspection Checklist; Engine Oil Inspection

Polaris Power P1000i
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
FIRST USE INSTRUCTIONS
Adding Fuel
1. Remove the fuel tank cap (A).
2. Fill carefully to avoid spilling fuel on
the fuel tank strainer (B). Do not
overfill the fuel tank (there should be
no fuel above the upper limit mark).
3. Securely tighten the fuel tank cap (A).
4. Position the fuel tank vent lever (C) OFF for storage or transport, or
ON to operate the generator.
5. Move generator away from the fueling source and site before
starting the engine.
After refueling, securely reinstall the fuel tank cap (A).
Loosen
Tighten
A
C
B

Table of Contents

Related product manuals