Polaris Power P1000i User Manual

PMS 419
P1000i
P2000i
Operator’s Manual
(Australian models)
Failure to properly follow the instructions and precautions in
this manual can result in property damage, serious injury or
DEATH!
For your nearest Polaris supplier,
call 0393945610
or visit www.polarispower.com.au
Polaris Sales Australia Pty Ltd.,
(ABN 62088081949) of Locked Bag 2006,
Sunshine Post Shop,
Sunshine, Victoria, 3020
Australia
Part No. 9925471 Rev 02
POLARIS POWER™

Polaris Power P1000i Specifications

General

Model	P1000i
Starting Watts	1000 W
Max Power	1000 W
Rated Power	900 W
Rated AC Output	900 W
Running Watts	900 W
AC Voltage	120 V
Rated AC Amperage	7.5 A
DC Voltage	12 V
Fuel Type	Gasoline
Engine Type	4-stroke OHV
Starting System	Recoil
Voltage	120 V
Frequency	60 Hz
Outlets	1 x 12V DC
Type	Inverter

Summary

Introduction

Safety Precautions

Failure to follow recommended precautions and procedures could result in severe injury or death.

Safety

General Safety Warnings

IMPORTANT SAFEY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

Operation Safety Precautions

Do not operate the generator in exposed locations where it will be subjected to wet conditions.

Fire and Operator Safety

Generator exhaust system gets hot enough to ignite some materials and burn skin if touched.

Fuel Safety Precautions

Petrol is highly flammable and explosive under certain conditions. Always use caution when handling petrol.

Safety

Carbon Monoxide Safety

Generator exhaust contains Carbon Monoxide (CO) vapors. Exposure to Carbon Monoxide by people or pets can result in SEVERE INJURY or DEATH.

Electrical Safety

This generator produces high voltage electricity.

Controls and Features

Controls and Features

Control Panel Components

First Use Instructions

Adding Engine Oil

Step-by-step guide for checking and adding engine oil before first use.

Adding Fuel

Instructions for safely filling the fuel tank, including warnings and precautions.

First Use Instructions

Fuel Recommendation

Pre-Operation Inspection

Pre-Operation Inspection Checklist

A checklist of essential checks before starting the generator.

Engine Oil Inspection

Operation

General Operation Safety

General safety precautions for operating the generator.

Refueling Steps

Step-by-step instructions for refueling the generator, including vent lever operation.

Pre-Start Safety Precautions

Essential safety checks to perform before starting the generator.

Engine Start-up Procedure

Detailed steps for starting the generator, including recoil grip and warm-up.

Stopping the Engine

Procedure for safely shutting down the generator under normal and emergency conditions.

Connecting Battery Charging Cable

Shutting Off Generators

Fuel Recommendations

Starting the Engine

Procedure for starting the generator, including choke and throttle settings.

Safe Refueling Procedures

Covers safe practices for refueling the generator, including warnings.

Operation

AC Operation Guide

Instructions for connecting and operating appliances using AC power.

Parallel Generator Operation

Guide to connecting two generators for increased power output.

Parallel Operation Procedure

Step-by-step instructions for connecting and operating generators in parallel.

Operation

AC Power Capacity Management

Understanding AC Capacity

Standby Power Connections

Building Electrical System Connection

Operation

DC Operation Guide

Instructions for connecting the battery charging cable for DC output.

Maintenance

Importance of Maintenance

Engine Oil Level Inspection

Air Filter Inspection

Air Filter Cleaning and Replacement

Spark Plug Inspection Details

Maintenance

Maintenance Safety Precautions

Critical safety warnings and precautions to follow during maintenance.

Maintenance

Periodic Maintenance Overview

General guidance on periodic checks, cleaning, lubrication, and adjustments.

Engine Oil Change Procedure

Step-by-step instructions for draining and refilling engine oil.

Spark Plug Inspection and Replacement

Guide to inspecting, cleaning, gapping, and replacing the spark plug.

Periodic Maintenance Schedule

A chart detailing maintenance tasks and their recommended intervals.

Maintenance

Initial Maintenance (Break-In)

Transportation and Storage

Transporting the Generator

Removing Generator from Storage

Transportation and Storage

Storage Preparation

Draining Fuel from Carburetor

Transportation and Storage

Draining Fuel for Storage

Detailed steps for draining fuel from the tank and carburetor for storage.

Transportation and Storage

Fogging the Engine for Storage

Specifications

Troubleshooting

Troubleshooting: Engine Not Turning Over

Identifies causes and solutions for the engine not starting or turning over.

Troubleshooting: Engine Lacks Power

Addresses symptoms of reduced engine power and potential causes.

Troubleshooting: Engine Pings or Knocks

Diagnoses issues related to engine pinging or knocking sounds.

Troubleshooting: Engine Turns Over, Not Start

Diagnoses issues when the engine cranks but fails to start.

Troubleshooting: Engine Backfires

Identifies causes and solutions for engine backfiring.

Troubleshooting: Irregular Engine Operation

Solutions for engines running irregularly, stalling, or misfiring.

Troubleshooting

Troubleshooting: Lean Fuel Issues

Troubleshooting: Rich Fuel Issues

Troubleshooting: No DC Receptacle Power

Troubleshooting

Troubleshooting: No AC Receptacle Power

Troubleshooting: Engine Stops or Loses Power

Solutions for the engine stopping unexpectedly or losing power.