EasyManuals Logo
Home>Polaris>Portable Generator>Power P1000i

Polaris Power P1000i User Manual

Polaris Power P1000i
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
49
MAINTENANCE
Engine Oil
Oil Recommendation
Oil directly affects performance and service life. Use a 4-stroke
automotive detergent oil. POLARIS 5W-30 Engine Oil is recommended
for this generator.
The SAE oil viscosity and service category are in the API label on the
oil container. POLARIS recommends the use of API service category
“SJ” or later, equivalent oil.
Oil Level Inspection
Failure to use the proper 4-stroke engine oil may result in engine
damage.
Using non-recommended oil may cause serious engine damage. Never
substitute or mix oil brands.
Note: Inspect the oil level before each use with the engine stopped and the
generator on a level surface.
1. Open the service door.
2. Remove the oil filler cap /
dipstick (A) and wipe it clean.
3. Insert the dipstick (A) into
filler neck, without screwing it
in, to inspect the oil level.
4. Remove the dipstick and
verify that the oil is at the
upper limit (B). Add
additional oil and inspect the
level as needed until the upper
limit has been reached.
5. Re-install the dipstick (A).
6. Re-install the service door.
A
B

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Power P1000i and is the answer not in the manual?

Polaris Power P1000i Specifications

General IconGeneral
BrandPolaris
ModelPower P1000i
CategoryPortable Generator
LanguageEnglish

Related product manuals