EasyManuals Logo
Home>Polaris>Portable Generator>Power P1000i

Polaris Power P1000i User Manual

Polaris Power P1000i
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
47
MAINTENANCE
Initial Maintenance
20-Hour Initial Break-In
In order to insure the optimum output and the maximum service life of
the generator, the generator should run at a 50% load for the first 20
hours
1. Perform “Oil Change”.
2. Perform “Air Filter Inspection”. Replace as needed.
Fuel System
Petrol is highly flammable and explosive, and can cause serious injury or
death. Stop the engine and keep heat, sparks, and flame away. Handle fuel
only outdoors. Wipe up spills immediately.
Fuel Line Inspection
Inspect the fuel line to ensure absence of twists, cracks, and / or damage.
Replace as needed.
Fuel Tank Strainer Inspection
1. Remove the fuel tank cap (A).
Loosen
Tighten
A
C

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Power P1000i and is the answer not in the manual?

Polaris Power P1000i Specifications

General IconGeneral
BrandPolaris
ModelPower P1000i
CategoryPortable Generator
LanguageEnglish

Related product manuals