EasyManuals Logo
Home>Polaris>Portable Generator>Power P1000i

Polaris Power P1000i User Manual

Polaris Power P1000i
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
59
TRANSPORTATION AND STORAGE
Storage
Draining Fuel from the Fuel Tank and Carburetor
Petrol is highly flammable and explosive and can cause serious injury.
Stop the engine and keep heat, sparks, and flame away. Handle fuel only
outdoors. Wipe up spills immediately.
Do not spill fuel when draining the fuel tank. Spilled fuel is a fire hazard,
causes environmental damage, and can cause damage to paint and
plastic. Wipe up spills immediately.
Note: This procedure applies if fuel will NOT be kept in the fuel tank during
storage.
1. Access the fuel tank. See page 58.
2. Empty the fuel tank into an approved petrol container. POLARIS
recommends using a commercially available petrol hand pump to
empty the tank. Do not use an electric pump.
3. Re-install the fuel tank strainer into the fuel tank.
4. Securely tighten fuel tank cap until it clicks.
5. Open the service door. See page 46.
6. Position engine switch to ON (see
18). Loosen the carburetor drain
screw (A).
7. Drain the petrol from the carburetor
through the attached drain hose (B)
and into a suitable container.
8. Remove the top of the unit to access
the spark plug. See page 54.
A
B
Screw driver

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Power P1000i and is the answer not in the manual?

Polaris Power P1000i Specifications

General IconGeneral
BrandPolaris
ModelPower P1000i
CategoryPortable Generator
LanguageEnglish

Related product manuals