46
TROUBLESHOOTING
No Power at AC Receptacles
No Power at DC Receptacle
POSSIBLE CAUSE SOLUTION
Output indicator is OFF, and overload indicator is ON
Take the generator to a Polaris servicing dealer or refer to
the service manual
AC circuit protector tripped Check AC load and reset circuit protector
Overload protector tripped Push the Overload Restart switch
Faulty power tool or appliance
Replace or repair power tool or appliance; stop and restart
the engine
Faulty generator
Take the generator to an authorized Polaris servicing
dealer or refer to the service manual
POSSIBLE CAUSE SOLUTION
Is the fuse blown Replace the fuse.
Faulty generator
Take the generator to an authorized Polaris servicing
dealer or refer to the service manual
To Next Page
Loading...
