Polaris Predator 90 Service Manual

ELECTRICAL
5.7
charging times carefully, or use a charger with limited
charging time/current capabilities. Polaris
recommends using the Christie Multi--Battery
Charger PV--67030, available from our tool provider
SPX for charging batteries. Always stop charging if
the battery becomes warm to the touch. Let it cool
sufficiently before resuming charging.
When the charging system is complete, install the
battery in the ATV and connect the red positive (+)
cable first, and the black ground (--) cable last. Coat
battery bolt threads with corrosion resistant Nyogelt
grease. Secure battery with the holder strap.
Nyogelt Grease
(PN 2871329)
WARNING
To avoid the possibility of explosion, connect
positive (red) cable first and negative (black)
cable last.
YOUTH ATV BATTERY CHARGING CHART
State
of
Charge
Voltage Action Charge Time*
100% 12.8--13
.0v
None
Full
Charge
None Required
75% 12.5--12
.8v
Slight
Charge
3--6 Hours @ 0.4A
50% 12.0--12
.5v
Charge 5--11 Hours @
0.4A
25% 11.5--12
.0v
Charge 13+Hours @ 0.4A
Check State
of Charge
0% 11.5v or
less
Charge 20 Hours @ 0.4A
Battery may
be Dead
* Charging times can vary depending on type
of charger. Follow the charger’s instructions.
Enfocus Software - Customer Support

Polaris Predator 90 Specifications

General

Brand	Polaris
Model	Predator 90
Category	Offroad Vehicle
Language	English