EasyManuals Logo

Polaris RANGER 570 EFI User Manual

Polaris RANGER 570 EFI
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
61
MAINTENANCE
Engine Oil
Oil and Filter Change
Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart
beginning on page 57. Always change the oil filter whenever changing oil.
The engine drain plug is located on the bottom of the
crankcase.
1. Position the vehicle on a level surface. Place the
transmission in PARK. Apply the brakes.
2. Start the engine. Allow it to idle for two to three minutes.
Stop the engine.
3. Clean the area around the drain plug.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to
contact skin.
4. Place a drain pan beneath engine crankcase and remove the
drain plug.
5. Allow the oil to drain completely.
6. Reinstall the sealing washer on the drain plug.
Tip: The sealing surfaces on drain plug and crankcase should be
clean and free of burrs, nicks or scratches.
7. Reinstall the drain plug. Torque to 12 ft. lbs. (16 Nm).
Drain Plug Access

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RANGER 570 EFI and is the answer not in the manual?

Polaris RANGER 570 EFI Specifications

General IconGeneral
BrandPolaris
ModelRANGER 570 EFI
CategoryUtility Vehicle
LanguageEnglish

Related product manuals