29
FEATURES AND CONTROLS
Instrument Cluster
High water pressure may damage
components. Wash the vehicle by hand
or with a garden hose using mild soap.
Do not use alcohol to clean the
instrument cluster. Do not allow insect
sprays to contact the lens. Immediately
clean off any gasoline that splashes on
the instrument cluster.
Speedometer
The speedometer displays vehicle speed
in either miles per hour (MPH) or
kilometers per hour (km/h). See page
31.
Mode Button
Use the MODE button to toggle through mode options. See page 31 for operation of the
modes.
Indicator Lamps
Lamp Indicates Condition
Vehicle Speed
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
Over Temperature This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the system
will automatically reduce engine power.
EPS Warning
(if equipped)
Not applicable.
Neutral This lamp illuminates when the transmission is in neutral and the
ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high beam.
Helmet/Seat Belt This lamp is a reminder to the operator to ensure all riders are
wearing helmets and seat belts before operating. The driver’s seat
belt is equipped with a seat belt interlock. Vehicle speed will be limited
to 15 MPH (24 km/h) if the seat belt is not secured.
Check Engine This indicator appears if an EFI-related fault occurs. Do not operate
the vehicle if this warning appears. Serious engine damage could
result. Your POLARIS dealer can assist.
Rider
Information
Center
Speedometer
Indicator
Lamps
MODE
Button
To Next Page
Loading...
Need help?
General
