79
MAINTENANCE
Storing the Vehicle
Any time the vehicle will be parked for more than a few hours, follow
the recommended storage procedures:
1. Make any necessary repairs and clean the vehicle. See page 75.
2. Clean the batteries. See page 73.
3. Store the vehicle out of the sun in a cool, dry place.
4. Be sure the storage area is well ventilated.
5. Turn the key off.
6. Do not set the park brake.
7. Verify that tire pressure is at specification.
8. Block the wheels to prevent rolling.
9. Fully charge the batteries. Leave the charger connected to maintain
a full charge during the storage period, or check battery voltage
each month during storage and recharge as needed to maintain a full
charge. If the charger remains connected, check it monthly to verify
proper operation.
Tip: Do not use plastic or coated materials. They do not allow enough ventilation
to prevent condensation, and may promote corrosion and oxidation.
WARNING! Do not cover the vehicle while the charger is connected.
Dangerous levels of hydrogen gas could accumulate.
Removal from Storage
1. Inspect all battery connections.
2. Verify that batteries are fully charged.
3. Verify that tire pressure is at specification.
4. Perform the pre-ride inspection. See page 38.
5. Inspect and verify the tightness of the bolts, nuts and other fasteners.
6. Lubricate at the intervals outlined in the Periodic Maintenance
Chart beginning on page 56.
To Next Page
Loading...
