35
FEATURES AND CONTROLS
Brake Pedal
Push the brake pedal toward the floor to slow or stop the vehicle. Apply
the brakes before turning the key on.
Accelerator Pedal
The accelerator pedal will function
only when the key is ON and the
direction selector switch is set to
either forward or reverse. To begin
moving or to increase vehicle speed,
gradually push the accelerator pedal
toward the floor. Holding the accel-
erator pedal down continuously will
accelerate the vehicle to the maxi-
mum speed.
To slow the vehicle, release the
accelerator pedal. Electric motor
braking provides braking when the
pedal is released. For additional
speed control or to stop the vehicle,
apply the service brakes.
To Next Page
Loading...
Need help?
General
