39
OPERATION
Driving Procedure
1. Disconnect the charging cable (if connected).
2. Wear a helmet and eye protection.
3. Sit in the driver's seat and fasten the seat belt.
4. Apply the brakes. Place the direction selector in neutral (N).
5. Turn the key to the ON position. Wait about a second for the contac-
tor to close before continuing.
6. Move the direction selector to forward or reverse.
7. Move the drive mode switch to the desired setting. See page 28.
8. Release the park brake.
9. Check your surroundings and determine your path of travel.
To Next Page
Loading...
