27
FEATURES AND CONTROLS
Console
Charge Status Indicator
When charging the batteries, the charge status indicator light flashes and
changes color to indicate the status of the charge. Refer to the table
below.
Key Switch
Move the direction selector switch to neu-
tral, then turn the key to the ON position to
activate the electrical circuits.
Tip: The accelerator will not start the motor if
the direction selector switch is in forward or
reverse when the key is turned on. Switch
to neutral, then choose forward or reverse.
Turn the key to the OFF position to disable
all electrical circuits. The key can be
removed from the switch when it is in the
OFF position.
Color Indication Code Definition
Green Solid Charge is complete, charger is in mainte-
nance mode.
Green Fast Flash Less than 80% of charge is completed.
Green Slow Flash More than 80% of charge is completed.
Amber Flashing Power mode is reduced, low AC voltage or
high internal charger temperature exists; open
hood to improve air flow.
Red Flashing Charger error exists; reset charger power and
refer to Troubleshooting Guide on page 31.
To Next Page
Loading...
Need help?
General
