9.38
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
4. Install Dust Plug.
5. Apply shock oil to rebound adjuster.
6. Insert spring.
7. Put the steel ball on the spring with a dab of shock oil.
8. Install rebound knob into eyelet, holding steel ball in
place with fingers.
9. Ensure rebound knob threads into eyelet correctly,
and you can feel the detents click.
NOTICE
Adjust rebound knob to allow metering rod to obtain
maximum travel in eyelet.
10.Install new O-ring on needle and apply thin layer of
Slick Honey.
11. Place shock shaft in clamp blocks and insert needle
into shock shaft.
STEERING / SUSPENSION
To Next Page
Loading...
Need help?
General
