Polaris RZR 900 2017 Service Manual

11.24
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
© Copyright Polaris Industries Inc.
1. Remove seats and rocker panels (Refer to Rocker
Panel / Console / Floor page 11.20).
2. Remove four Torx T40 screws
q
and five push rivets
w
retaining the front console to the floor.
3. Remove shift handle knob and remove the front
console.
4. Remove the Torx T40 screws
e
and push rivets
r
retaining the rear console to the rear floor.
5. Remove the rear console.
6. Remove two M10x1.25x20 bolts from the rear seat
frame
t
and two M10x1.50x55
y
bolts from the rear
seat frame assembly.
7. Remove the seat frame.
8. Disconnect negative and positive battery cables.
Remove the battery.
9. Remove two fasteners retaining the fuse panel to the
lower rear close off panel.
10.Remove two fasteners retaining the voltage regulator
to the back of the lower rear close off panel.
11. Remove two Torx T40 screws
u
and four push rivets
i
retaining the lower rear close off panel.
12.Remove four Torx T40 screws
o
retaining the upper
rear close off panel. Remove the upper close off
panel.
BODY / FRAME

Polaris RZR 900 2017 Specifications

General

Brand	Polaris
Model	RZR 900 2017
Category	Offroad Vehicle
Language	English