WHEEL INSTALLATION
1. Place the wheel in the correct
position on the wheel hub. Be
sure the valve stem
q
is toward
the outside and rotation arrows
on the tire point toward forward
rotation.
2. Attach the wheel nuts and finger
tighten.
3. Carefully lower the vehicle to the
ground.
4. Torque the wheel nuts to
specification in a crisscross
pattern. See the Axle and Wheel
Nut Torque Specifications
section for details.
LIGHTS
Headlight and taillight lenses become dirty during normal operation. Clean all
lights frequently to ensure a clear field of vision as well as visibility to other
vehicles.
TIP
LED LAMPS
If an LED headlamp appears to have moisture or fogging inside the lens,
disconnect the wiring harness from the headlamp(s) for a few days to allow the
moisture to clear out.
TIP
HALOGEN LAMPS
When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil
from your skin leaves a residue, causing a hot spot that will shorten the life of
the lamp.
TAILLIGHT / BRAKE LIGHT REPLACEMENT
The taillight assembly is not serviceable. If the taillight or brake light fails to
operate properly, replace the entire taillight assembly.
128
MAINTENANCE
To Next Page
Loading...
Need help?
General
