HEADLIGHT REPLACEMENT
If a headlight becomes damaged or inoperable, the entire headlight assembly
must be replaced. Always make sure lights are adjusted properly for best
visibility.
HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted slightly upward or downward and to the left
or right.
1. Position the vehicle on a level surface. The headlight should be
approximately 25 ft. (7.6 m)
q
from a wall.
2. Measure the distance from the floor to the center of the headlight
e
and
make a mark on the wall at the same height.
3. Apply the brakes. Start the engine. Place the transmission in PARK. Turn the
headlights to high beam.
129
MAINTENANCE
To Next Page
Loading...
