ENGINE
3.7
SPECIAL TOOLS
PART NUMBER TOOL DESCRIPTION
PV--43527 Oil Filter Wrench
2200634 Valve Seat Reconditioning Kit
PU--45257 Valve Spring Compressor
PU--45652 Valve Pressure Hose
2871043 Flywheel Puller
PU--44693 Valve Train Table
2870390 Piston Support Block
PU--45497--2 Cam Gear Tooth Alignment Tool
PU--45497--1 Cam Gear Spring Installation Kit (Tapered Pins)
PU--45498 Cam Spanner Wrench
PU--45648 Gear Holder
PA--44995 Water Pump Mechanical Seal Installer
PU--45543 Universal Driver Handle
PU--45483 Main Seal Installer
PU--45658 Main Crankshaft Seal Saver
PA--45401 Water Pump Seal Saver
2870975 Mity Vact Pressure Test Tool
PU--45778 Oil System Priming Tool
ACCESSIBLE COMPONENTS
The following components can be serviced or
removed with the engine installed in the frame:
G Flywheel
G Alternator/Stator
G Starter Motor/Starter Drive
G Cylinder Head
G Cylinder
G Piston/RIngs
G Camshaft
G Rocker Arms
G Oil pump/Water Pump and Oil
Pump Drive Gear
G Gear Train Components
The following components require engine
removal for service:
G Counterbalance Shaft or Bearing(s)
G Connecting Rod
G Crankshaft
G Crankshaft Main Bearings
G Crankcase
Enfocus Software - Customer Support
To Next Page
Loading...
