153
Maintenance
Drive Chain
Lubricate the drive chain with Polaris chain spray lube or an approved chain lube at the gen-
eral lubrication interval specified in the Periodic Maintenance Chart beginning on page 114.
Lubricate more often under severe use, such as in dirty or wet conditions. See page 182 for
the part numbers of Polaris products.
CAUTION
Washing the drive chain with a high pressure washer or gasoline can cause premature wear and
drive chain failure. Don't use a high pressure washer or gasoline to clean the drive chain.
CAUTION
Adjusting or operating the ATV with improper rear drive chain slack can result in severe damage to
the transmission and drive components. Always make sure the slack is within the stated specifica-
tions.
To Next Page
Loading...
