84
Break-in Period
1. Fill the fuel tank with gasoline. See page 78.
2. Check the oil level. Add the recommended oil as needed to maintain the oil level in the
proper range. See page 125.
3. Drive slowly at first. Select an open area that allows room to familiarize yourself with
vehicle operation and handling.
4. Vary throttle positions. Do not operate at sustained idle.
5. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride
inspection checklist. See page 85.
6. Perform the following maintenance at the end of the break-in period.
Item Remarks
See
Page
Engine oil change Perform break-in oil change 126
Oil pre-filter screen Clean filter with oil change 127
Transmission oil Perform break-in oil change 130
Valve clearance See your dealer for inspection and adjustment --
To Next Page
Loading...
