90
MAINTENANCE
Fuse Replacement
If the engine stops or will not start,
or if you experience other electrical
failures, a fuse may need replace-
ment. Locate and correct any short
circuits that may have caused the
blown fuse, then replace the fuse.
Spare fuses are provided in the rear
storage box.
1. Open the front box cover.
2. Remove the suspect fuse from
the fuse panel. If the fuse is
blown, install a new fuse with
the same amperage.
3. Secure the front box cover.
Fuse Feature Supported
5A Speedometer
15A Electronic Fuel Injection
20A (Main Fuse) Ignition, Lighting
20A Accessories, 12V Power Receptacle
To Next Page
Loading...
