BRAKES
9.15
FRONT CALIPER
INSTALLA
TION
1. Install caliper on hub strut, and torque mounting
bolts.
18 ft. lbs. (25 Nm)
Front Caliper Mounting Bolt Torque
18 ft. lbs. (25 Nm)
2. Install brake line and tighten securely with a line
wrench.
3. Install the adjuster screw and turn until stationary
pad contacts disc, then back off 1/2 turn.
4. Follow brake bleeding procedure outlined on
Pages 9.6-9.7.
5. Install wheels and torque wheel nuts to
specification.
Front Wheel Nut Torque
20 ft. lbs. (27 Nm).
To Next Page
Loading...
