MAINTENANCE
2.28
TIRE PRESSURE
Tire Pressure Inspection (PSI - Cold)
Front Rear
4 3
TIRE INSPECTION
WARNING
Operating an ATV with worn tires will increase
the possibility of the vehicle skidding and pos-
sible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8² (.3 cm) or less.
CAUTION:
G Maintain proper tire pressure. Refer
to the warning tire pressure decal
applied to the vehicle.
G Improper tire inflation may affect ATV
maneuverability.
G When replacing a tire always use
original equipment size and type.
G The use of non-standard size or type
tires may affect ATV handling.
Tire Tread Depth
Always replac e t ires when tread dept h is wor n t o
1/8² (3 mm) or less.
Tread
Depth 1/8I (3 mm)
FRAME, NUTS, BOLTS,
F
ASTENERS
Periodically inspect the tightness of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place. Refer to specific
fastener torques listed in each chapter.
To Next Page
Loading...
Need help?
General
