9
SAFETY WARNING AND OPERATION DECALS
WARNING
LOAD DISTRIBUTION WARNINGS
Correct loading of this vehicle is necessary to maintain proper stability and operating char-
acteristics. Overloading or incorrect positioning of the load effects the vehicles turning,
stopping distance and stability. Failure to follow loading requirements could cause severe
injury or death. REDUCE SPEED AND ALLOW GREATER DISTANCE FOR BRAKING
WHEN CARRYING CARGO.
CARGO WEIGHT DISTRIBUTION should be 1/3 on the front rack and 2/3 on the rear rack.
When operating over rough or hilly terrain, reduce speed and cargo to maintain stable driv-
ing conditions. Maximum cargo capacity is 270 lbs. on level terrain. When operating at
maximum cargo capacity, the cargo weight distribution must be 90 lbs. on the front rack and
180 lbs. on the rear rack.
ALL LOADS MUST BE SECURED BEFORE MOVING VEHICLE. Unsecured loads can
create unstable operating conditions which could result in loss of control of the vehicle.
LOADS MUST BE CARRIED AS LOW ON THE RACKS AS POSSIBLE. Carrying loads
high on the racks raises the center of gravity of the vehicle and creates a less stable operat-
ing condition. When cargo loads are carried high on the racks, the weightof theloads must
be reduced to maintain stable operating conditions.
OPERATE ONLY WITH STABLE AND SAFEL Y ARRANGED LOADS. When handling off-
centered loads which cannot be centered, securely fasten load and operate with extra cau-
tion.
EXTREME CAUTION MUST BE USED when operating with loads extending over the rack
sides. Stability and maneuverability may be adversely affected, causing t he machine to
overturn.
DO NOT BLOCK THE FRONT HEADLIGHT BEAM when carrying loads on the front rack.
SEE YOUR OWNER’S MANUAL.
7074110
6
This decal is found only on models with dual racks.
To Next Page
Loading...
Need help?
General
