61
DAILY PRE-RIDE INSPECTION
Inspect your ATV each time before riding to ensure it is in proper working or-
der. If proper inspection is not done, severe injury or death could result.
WARNING
If a proper inspection is not performed serious injury or death can result.
Always inspect your ATV before riding following the checklist c arefully.
Before riding your vehicle, inspect all operating controls and parts.
Item/Inspection Procedure
1.Tires - check condition and pressures
2.Fuel and oil tanks - fill both tanks to their proper levels
3.All brakes - check operation,adjustment and fluidlevel (includesauxil-
iary brake)
4.Throttle - check for free operation and closing
5.Headlight/Taillight/Brakelight - check operation of all indicator lights
and switches
6.Engine stop switch - check for proper function
7.Wheels - check for tightness of wheel nuts and axle nuts; check that
axle nuts are secured by cotter pins
8.Drive chain - condition and slack; refer to drive chain adjustment
9.Air c leaner element - check for dirt; clean or replace
10.Steering - check for free operation noting any unusual looseness in
any area
11.Loose parts - visually inspect vehicle for any damaged or loose nuts/
bolts or fasteners
12.Operators helmet, goggles and clothing
13.Engine coolant - (Liquid Cooled Models Only) check for proper level
at the recovery bottle
To Next Page
Loading...
Need help?
General
