EasyManua.ls Logo

Polaris W 445 - Pool Cleaner Maintenance; Cleaning the Cleaner; Filter Cleaning

Polaris W 445
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Maintenance
To avoid serious injury:
Disconnect the cleaner from the power supply.
3.1 I Cleaning the cleaner
The appliance must be cleaned regularly using clean or slightly soapy water. Do not use solvents.
Rinse the appliance thoroughly with clean water.
Do not let your appliance dry in the sun by the pool.
Tip: To preserve the integrity of the cleaner and guarantee opmum performance:
- The lter and brushes should be replaced every 2 years,
- Examine the wear indicator on the tracks and replace the tracks as soon as the indicator is reached.
3.2 I Cleaning the lter as soon as the appliance is out of the pool
If the lter is clogged, clean it with an acidic soluon (spirit vinegar, for example). It is recommended that you do this
at least once a year, since the lter will clog if not used for several months (winterising period).
1
2

Table of Contents

Related product manuals