Polaris W 445 - Cleaning the Impeller; Replacing Tracks

16
EN
3.3 I Cleaning the impeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when handling the impeller .
• Loosen the screw on the grid (see gure ).
• Remove the grid carefully (see gure ).
• Wear gloves and pull on the impeller while holding it ghtly (see gure ). Remove all debris (leaves, stones, etc.)
which may be blocking the impeller.
3.4 I Replacing the tracks
• The tracks must be replaced by the retailer.