19
4.2 I User alerts
Flashing LED:
Soluons
• Check that the cleaner is correctly connected to the control box.
If necessary, unplug it and reconnect it following the appropriate
procedure.
• Rotate the brushes to check that nothing is prevenng them from
turning correctly (sand, cable, etc.).
• The tracks are not turning correctly: Contact the retailer .
• Cleaner operang outside the pool. Make sure you start the cleaner
when it is in the water (see § “2.1 I Immersing the cleaner”).
• Check that there are no stones or hair in the impeller.
• Clean or change the lter if necessary.
If the problem connues contact the retailer:
Recycling
This symbol is required by the European direcve DEEE 2012/19/EU (direcve on waste electrical and electronic
equipment) and means that your appliance must not be thrown into a normal bin. It will be selecvely collected
for the purpose of reuse, recycling or transformaon. If it contains any substances that may be harmful to the
environment, these will be eliminated or neutralised. Contact your retailer for recycling informaon.
To Next Page
Loading...
Need help?
General
