14
Current Channel Information
Press “INFO” key on the remote control to view currentchannel information,
the indications of channel information are listed in the following table.
Press “EXIT” key on the remote control to exit this OSD.
Input Setup
Press input key on the remote control to enter "INPUT SOURCE" menu. There are these
options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2",“HDMI3", “USB".
Use /key to select a input source and press Enter key to confirm.
00:00 01/01/1970
To Next Page
Loading...
Need help?
General