19
On Time
In "On Time” item, press button or ENTER button to enter the submenu, set the time to turn
on the TV set, when the TV set is in the standby mode. You can also choose which day to
control you TV set in a week.
Sleep Timer
1. Press / key to select "Sleep Timer" option.
2. Press / key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins,
60mins, 90mins, 120mins, 180mins, 240mins).
Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power
failure occurs.
Notes: When the time is less than 60 seconds, remind information will be displayed on
the screen. Press any key button to cancel timer function.
Auto Sleep
Press / key to select whether to open the Nosignal Power off features. If this function is
opened, the TV will power off in ten minutes when there is no signal.
Auto Sync
You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is
decided by the DTV signal.
Clock --:--
When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.
Time Zone
You can choose it to modify your time zone in the TV set.
1. Press / key to select "Time Zone" option.
2. Press / key to select time zone.
Options
1. Press Menu key to display the main menu on the screen.
2. Press / key to select "Option" option.
3. Press key to enter “Option" submenu.
OSD Language
1.
Press / key to select “OSD Language " option.
2. Press ENTER or key to select a proper language for OSD.
OSD Time
Set the preferred amount of time
for the OSD to be displayed on the screen.
OSD Language
OSD Time
Closed Caption
Reset
Network Configuration
Software Update(USB)
View End-User License
Internet Update Check
Network Update Information
To Next Page
Loading...
Need help?
General