For Windows® and Macintosh Users:
PC Mac
Symptom Problem Solution
I cannot activate my
digital camera by pressing
the button.
Insufcient battery power
or battery is missing.
Recharge your battery or insert your
battery into the camera.
Battery door is not
closed.
Make sure the battery door is
securely closed.
Camera suddenly powers
off.
Auto Power Off function
is activated.
Or
The battery is exhausted.
Turn the camera on.
Or
Recharge your battery.
Image is not recorded
when the Shutter button
is pressed.
Camera is turned off.
Or
Flash unit is charging.
Or
Memory is full.
Turn the camera on.
Or
Wait until ash unit charging
nishes.
Or
Delete images you no longer need,
or use another memory card.
Camera powers off during
self-timer countdown.
The battery is exhausted. Recharge your battery.
LCD screen image is out
of focus.
Normal focus is being
used for macro images.
Select a correct scene shooting
mode for taking pictures.
AVI le cannot be played. DirectX version is lower
than 9.0
Install DirectX 9.0 or above. Visit
http://www.microsoft.com/directx
for more details.
The camera is detected by
the Windows and works
properly. But a drive letter
of the Removable Disk is
not created.
The removable disk
crashes with the network
drives.
Disconnect the crashed network
drive and reserve this drive letter
for the camera.
There is no response from
the camera while pressing
any buttons.
The LCD screen is frozen
or the camera is hanged.
Remove and re-install the battery or
batteries to reset the camera. Your
valuable data stored in the camera
will not be lost.