• Inserting and Removing an SD Card
The camera comes with internal memory which allows you to store
pictures and movies. You can expand the memory capacity by using an
optional SD memory card.
Insert the memory card into the 1.
camera as shown in the illustration.
To remove the SD card, press the card 2.
inwards to release it.
When the card pops out, gently 3.
remove it from the slot.
Note:
• When a memory card is inserted, movies/pictures are saved on card
rather than on the built-in memory.
• Protecting Data on an SD Card: SD card is read-only by locking the
SD card. Pictures and movies cannot be recorded when the SD card is
locked. Make sure the lock is in writeable position inserting into your
camera.
Writeable
position
Write-Protected
Position
MB
To Next Page
Loading...
