• Setting Flash Mode
Turn on the camera and set the Capture/Playback selector to Capture mode.
Press ash button
to change.
Flash off
Flash on
Auto ash
Red eye
The camera has four ash modes. Different ash setting applies to
different situation.
Auto ash: The ash res automatically as needed. Use this
setting to take most pictures.
Flash on: The ash res for every picture. Use this setting
indoors in low light.
Flash off: The ash does not re. Use this setting for outdoor
pictures or where ash is prohibited or may be
distracting. Also use when shooting toward a reective
surface, such as a window or mirror. If you do not have
enough light when using this setting, your pictures will
be too dark.
Red eye: Use this setting to avoid red glare in your subject’s
eyes. The camera res a brief, preash ash before the
regular ash.
NOTE:
Effective ash light range: Approx. 4 ~ 6 feet (Approx. 1 ~ 1.5 m).
To Next Page
Loading...
