9 Using the Camera as a Web Cam
• Setting up NetMeeting
NOTE:
Set the Driver Type to WDM before starting plugging the camera into your
computer. For further detail please refer to Mass Storage/WDM on page 36.
1. Connect your iON 230 to your computer via the USB cable. Connect
the USB cable to a USB port on your PC on the other end.
2. Put your iON 230 on top of your PC monitor or another at surface.
3. Connect your microphone (not included) and speakers (not included)
to your audio card’s Mic in and line out jack separately.
• Start NetMeeting
NOTE:
For Windows® XP / 2000 users who use NetMeeting for the rst time , Go to
Start -> Run ->type in “conf” ->click “OK” and then follow the on-screen set
up instruction to set up NetMeeting.
1. Double click the “NetMeeting” icon on the desktop or select the
“NetMeeting” icon from the Windows Start Menu.
2. If you need further help on how to use Microsoft® NetMeeting™, select
the “Help” under the menu bar and choose the topic you need. You
can also refer to the Polaroid “EASY TO USE GUIDE TO MICROSOFT®
NETMEETING™” or visit the website: http://www.microsoft.com/
windows/netmeeting.
To Next Page
Loading...
