31
Polaroid m737t Digital Camera User Guide
www.polaroid.com
NOTE:
•
(Still Image) mode is the capture mode by default.
• When the camera’s focus mark are in red, there is difficulty in focusing the
subject. Release the Shutter button, recompose the scene and press the
Shutter button halfway to reset the focus.
• The LCD screen will show you the aperture value and shutter speed at which
you take the picture.
• If the shutter speed is slow or the image may become blurred, the shake
warning icon
may appear on the LCD screen. To avoid this situation, the
use of a tripod is recommended or the use of the flash may be needed. Put
the camera in the Auto Flash mode to see if the shake warning disappears.
4. Hold the camera steady and slowly press the shutter button down to
take your image.
To Next Page
Loading...
Need help?
General
