3. Release the button when LED turns red/amber after 5 green/amber blinks.
The LED color will change according to the following order:
Amber red (5 blinks) amber (5 blinks) green (5 blinks) green/amber (5 blinks)
red/amber (5 blinks) solid green
4.3.6 Skip AUTO.BAS
TSPL2 programming language allows user to download an auto execution file to flash memory.
Printer will run the AUTO.BAS program immediately when switching on the printer. The
AUTO.BAS program can be interrupted without running the program by the power-on utility.
Please follow the procedures below to skip an AUTO.BAS program.
1. Switch off the printer
2. Press the FEED button while you switch on the printer
3. Release the FEED button when LED becomes solid green.
The LED color will change according to the following order:
Amber red (5 blinks) amber (5 blinks) green (5 blinks) green/amber (5 blinks)
red/amber (5 blinks) solid green
4. Printer will be interrupted to run the AUTO.BAS program.
30
To Next Page
Loading...