Polaroid P420T

5.2 Printer Function
1. Select the PC‘s interface connected to the printer.
2. Click the “Printer Function” button to setup.
3. The detailed functions in the Printer Function Group are listed as below.
Function Description
Calibrate
Sensor
Calibrate
the
sensor specified in the Printer Setup
group
media sensor field
Ethernet
Setup
Setup the
IP address, subnet mask, gateway for
the
on boardEthernet
RTC
Setup
Synchronize printer
Real Time Clock with PC
Print
Test Page
Print a
test page
Reset
Printer
Reboot
printer
Factory
Default
Initialize the printer and restore the settings
to
factory
default. (Please refer section 4.3.3)
Dump
Text
To
activate the printer dump mode.
Ignore
AUTO.BAS
Ignore the
downloaded AUTO.BAS program
Configuration
Page
Print printer configuration
(Please refer section
4.3.2)
Password
Setup
Set
the password to protect the settings
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
2
1
The
default interface settingis
USB. If
printer is connected via
USB
interface, no changes is
needed
32