Polaroid P420T

Need help?

Do you have a question about the Polaroid P420T and is the answer not in the manual?

Polaroid P420T Specifications

General

Model	P420T
Connectivity	USB
Dimensions	175 mm x 75 mm x 105 mm
Weight	150 g
Scanning Capability	1D
Operating System Compatibility	Windows, Linux, MAC

Summary

3. Setup

3.1 Setting up the Printer

Step-by-step guide for the initial physical setup of the printer.

3.2 Loading the Ribbon

Detailed instructions for installing the printer ribbon.

3.3 Loading the Media

Steps for loading various types of label media into the printer.

3.3.1 Loading the Roll Labels

Instructions for loading standard roll labels into the printer.

4. LED and Button Functions

4.3 Power-on Utilities

4.3.1 Ribbon and GapBlack Mark Sensor Calibration

Instructions for calibrating ribbon and media sensors via power-on utility.

4.3.2 GapBlack Mark Calibration, Self-test and Dump Mode

4.3.3 Printer Initialization

4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark Sensor

Steps to configure and calibrate the black mark sensor.

4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor

Steps to configure and calibrate the gap sensor.

5. Diagnostic Tool

5.1 Start the Diagnostic Tool

5.2 Printer Function

5.3 Calibrating Media Sensor by Diagnostic Tool

Instructions for calibrating the media sensor using the diagnostic tool.

5.3.1 Auto Calibration

Step-by-step guide for automatic sensor calibration using the diagnostic tool.

5.4 Setting Ethernet by Diagnostic Utility (Option)

5.4.1 Using USB interface to setup Ethernet interface

5.4.2 Using RS-232 interface to setup Ethernet interface

5.4.3 Using Ethernet interface to setup Ethernet interface

6. Troubleshooting

6.1 Common Problems

A guide to diagnosing and resolving frequent issues encountered with the printer.

Table of Contents