2.5 Installing in Vehicles
2.5.1 Mount to Windshield
1.
Attach the bracket to the device.
Slide and push until the connection is firm.
2. With the suction-cup laying flat, position the suction-cup on the windshield.
3. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the
windshield. Make sure the base is securely locked in place.
Do not install the device on a tinted window. Doing so may damage the tint film. When
installed in recommended position (as in the picture), the Dash Cam can reach best performance in some
of the functions (LDWS, SPEED LIMIT ALERT, etc.). B
But before mounting, please check with
your local DMV for the traffic laws of the location/method to mount appropriately.
To Next Page
Loading...
Need help?
General
