4 Using the Dash Cam
4.1 Recording Videos
4.1.1 Record videos while driving
When the vehicle engine starts up and the
function is enabled, the Dash Cam
automatically turns on and starts recording.
Recording will automatically stop when the engine is switched off.
Or press Arrow button to stop recording manually.
Note:
On some cars, the recording will continue when the engine is switched off.
If this happens, do one of the following:
- Manually turn off the cigarette lighter socket if possible..
- Remove the car adapter from the cigarette lighter.
4.1.2 Manual Video Recording
button to start recording.
2. Press the A
button to stop recording.
Note:
1. One video file is saved for every 3, 5, or 10 minutes of recording, depending on setting.
2. The device saves the recording on the memory card. If the memory card capacity is
full, the oldest file in the memory card is overwritten.
4.1.3 Emergency Recording
During normal video recording, if vehicle is engaged in unusual collision or impact, Emergency
recording will start automatically. However, to turn on manual Emergency Recording, simply move
the Arrow button right to begin emergency recording mode. The “Emergency” message will be
displayed immediately on the upper left corner of the screen, and the recorded file will be
continuous and protected from being overwritten.
To stop the recording, press the A
To Next Page
Loading...
Need help?
General
