Insert the memory card with the gold contacts facing the back of the Dash Cam. Push the
memory card until it clicks into place. (
U
se class 6 or above the micro SD cards for this Dash Cam;
It is recommended to format the micro SD cards before the initial use, for format operation
please see 5.1.6 on page 18.)
To remove the memory card
Push the edge of the memory card inward until you hear/feel it click, then allow it to push out
until you can remove it from the slot.
N
1.
Do not remove or insert the memory card when the device is powered on. This may damage
the memory card.
2. It is recommended to use 8, 16 or 32 GB, Class 6 speed or above micro SD card.
3. It is recommended to format the micro SD cards before the initial use.
Move A
To Next Page
Loading...
Need help?
General
