For Macintosh Users:
Mac
NOTE:
For Mac user, directly plug-in the picture viewer and no need to install the
driver.
1. Turn on the picture viewer.
2. Connect the picture viewer to a computer via the USB cable. The
systems will automatically recognize the mass storage drive. (System
will automatically create a Mass Storage named “Unlabeled”)
NOTE:
This Drive name will vary from different version of Mac OS system.
3. Double click the folder “Unlabeled” to enter sub-folder “DCIM”.
4. Double click “Unlabeled” -> double click “DCIM” -> double click
“100 MEDIA”.
5. Choose the pictures and video clips stored in your computer and drag
them to the “100 MEDIA” folder.
NOTE:
• The izonePHOTO™ may support the images in standard Huffman table JPEG
format and video clips in AVI and asf formats. Use a third-party software
to convert the image to JPEG format or the video clip to asf format if the
izonePHOTO™ cannot play it.
• The izonePHOTO™ can only read images and video clips stored in the “100
MEDIA” folder. The picture viewer will not read images and video les in any
other folder.
To Next Page
Loading...
Need help?
General
