Polaroid VCM632 User Manual

10
Stop Alarm Ring
When the alarm rings, press the button on the remote control. The alarm stops but the alarm settings
remain.
Set the Sleep Timer
This unit can switch to standby automatically after a set period of time.
1 Press the TIMER/SLEEP button on the remote control repeatedly to select your desired number of
minutes. The number of minutes shown will display in this sequence:
SLEEP 90 SLEEP 60 SLEEP 30 SLEEP 15 SLEEP 00
2 Stop pressing the TIMER/SLEEP button when your desired number of minutes is displayed. The sleep
timer is now set.
- Press the TIMER/SLEEP button to view the remaining time before switch o.
- To cancel the sleep timer, press the TIMER/SLEEP button repeatedly until “SLEEP 00” shows on the
display.
PLAY
CD/MP3/WMA Operation
1 Press the button on the main unit or press
the CD button on the remote control to select
the DISC source.
2 The unit will read the disc and play it
automatically after you place a disc onto the
disc tray and press the
K
button to close the
tray.
USB Operation
1 Press the button on the main unit or press
the DOCK/USB button on the remote control
to select USB mode.
2 Insert the USB device.

Polaroid VCM632 Specifications

Power

power requirements	AC110-120V~ 60 Hz
power consumption	25W
output power (max)	5W x2

Audio

total harmonic distortion	1%(1kHz, 1W)
audio input sensitivity	500mV
frequency response	45Hz - 20KHz
tuning range	87.5 - 108.0MHz

Speakers

total impedance	2 Ω

Remote Control

distance	6m
angle	30O

Weight and Dimensions

main unit dimensions	375 x 200 x 79 mm