To Next Page

To Previous Page

Connect to FM Antenna

- Connect the supplied FM wire antenna to the FM

antenna socket on the unit.

- To avoid noise, keep antennas away from the unit's,

the connecting cord and the AC power cord.

Connecting Power

Caution:

- Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the

rating label on the back or the underside of the unit.

- Before connecting the AC power cord, ensure you

have completed all other connections.

• ConnectthepowertotheAC socket on the unit and

a wall outlet.

- Please turn the unit o completely to save energy

when not in use.

General Operation

Power ON/OFF

When you rst connect the unit to the mains socket, the unit will be in STANDBY mode.

• Pressthe button on the main unit or on the remote control to switch the main unit ON.

• Pressthe button on the main unit or on the remote control to switch the main unit back to Standby

mode.

• Disconnectthemainsplugfromthemainssocketifyouwanttoswitchtheunitocompletely.

Note: When there is no input signal (or weak input signal) in AUX/docking/Bluetooth and when CD is not

playing (No disc, Stop or Pause) for over 15 minutes, the unit will automatically switch to Standby mode.

Select Modes

To get to the desired function mode, press the button repeatedly on the unit or press the CD, DOCK,

FM, AUX/BT(Bluetooth) buttons on the remote control to select the desired mode.

Turn the Bass ON/OFF

Press the BASS button on the remote control repeatedly to turn the bass on or o.

Adjust the Volume

Press the VOL +/– buttons on the main unit or on the remote control to adjust the volume.

If you wish to turn the sound o, press the MUTE button on the remote control. Press the MUTE button

again or press VOL+/- button to resume normal volume.

distance	6m
angle	30O

Polaroid VCM632 User Manual

Questions and Answers: